ANSI / IEEE STANDARDS COLLECTION
Description
List:
1. ANSI C37.42-1996 dweller National Standard Specification for High-Voltage Expulsion Type Distribution Class Fuses%2C Cutouts%2C Fuse Disconnecting Switches and Fuse Links.
2. ANSI_IEEE C67.92-1987 — IEEE Guide For The Application Of Neutral Grounding In Electrical Utility Systems Part I-introduction.
3. ANSI_IEEE Std 432-1976 — IEEE pass for detachment fix for rotating electrical machinery (5 hp to inferior than 10 000 hp).
4. ANSI_IEEE Std 665-1995 — IEEE pass for generating send grounding.
5. ANSI-IEEE Std 125-1988 — IEEE advisable training for activity of equipment specifications for speed-governing of hydraulic turbines witting to intend automobile generators.
6. ANSI–IEEE Std 576-1989 IEEE advisable training for installation, termination, and investigating of insulated noesis telegram as utilised in the lubricator and chemical industry.
7. ANSI–IEEE Std C37.97-1979 — IEEE Guide for Protective Relay Applications to Power System Buses.
8. ANSI–IEEE Std C57.12.56-1986 — IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers.
9. IEEE Std 18-2002 (Revision of IEEE Std 18-1992) — IEEE Standard for Shunt Power Capacitors.
10. IEEE Std 80-2000 – IEEE pass for country in AC substation grounding.
11. IEEE Std 142-2007 (Revision of IEEE Std 142-1991) — IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems.
12. IEEE Std 260.1-2004 (Revision of IEEE Std 260.1-1993) — IEEE Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units).
13. IEEE Std 519-1992 — IEEE advisable practices and requirements for harmonised curb in electrical noesis systems.
14. IEEE Std 929-2000 — IEEE advisable training for programme programme of photovoltaic (PV) systems.
15. IEEE Std 937-2000 — IEEE advisable training for artefact and fix of lead-acid batteries for photovoltaic.
16. IEEE Std 937-2007 — IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic %28PV%29 Systems.
17. IEEE Std 943-1986 (1992) — IEEE Guide for Aging Mechanisms and Diagnostic Procedures in Evaluating Electrical Insulation Systems.
18. IEEE Std 946-1992 — IEEE advisable training for the organisation of DC helper noesis systems for generating stations.
19. IEEE Std 946-2005 — IEEE advisable training for the organisation of DC helper noesis systems for generating stations.
20. IEEE Std 958-2003 — IEEE Guide for the Application of AC Adjustable-Speed Drives on 2400 to 13 800 V Auxiliary Systems in Electric Power Generating Stations.
21. IEEE Std 1010-2006 — IEEE Guide for Control of Hydroelectric Power Plants.
22. IEEE Std 1050-1996 — IEEE Guide for Instrumentation and Control Grounding in Generating Stations.
23. IEEE Std 1100-1992 — IEEE advisable training for powering and attachment huffy electronic equipment.
24. IEEE Std 1100 – 2005 — IEEE Recommended Practice for Powering and Grounding Electronic Equipment.
25. IEEE Std 1120 – 2004 — IEEE Guide for the Planning, Design, Installation, and Repair of Submarine Power Cable Systems.
26. IEEE Std 1125-1993 — IEEE pass for wetness activity and curb in SF6 Gas-Insulated Equipment.
27. IEEE Std 1138-1994 — IEEE Standard Construction of Composite Fiber Optic Overhead Ground Wire – OPGW – for Use on Electric Utility Power Lines.
28. IEEE Std 1142-1995 — IEEE Guide for the Design, Testing, and Application of Moisture-Impervious, Solid Dielectric, 5-35 kV Power Cable Using Metal-Plastic Laminates.
29. IEEE Std 1143-1994 IEEE pass on shielding training for baritone emf cables.
30. IEEE Std 1159-1995 — IEEE Recommended Practice for Monitoring Electric Power Quality.
31. IEEE Std 1159.3-2003 — IEEE Recommended Practice for the Transfer of Power Quality Data.
32. IEEE Std 1184-2006 — IEEE Guide for Batteries for Uninterruptible Power Supply Systems.
33. IEEE Std 1247™-2005 (Revision of IEEE Std 1247-1998) — IEEE Standard for Interrupter Switches for Alternating Current, Rated Above 1000 Volts.
34. IEEE Std 1248-1998 — IEEE pass for the authorisation of electrical systems inhydroelectric noesis plants.
35. IEEE Std 1248-1998 IEEE pass for the authorisation of electrical systems in hydroelectric noesis plants.
36. IEEE Std 1283-2004 — IEEE Guide for Determining the Effects of High-Temperature Operation on Conductors%2C Connectors%2C and Accessories.
37. IEEE Std 1300-1996 IEEE pass for telegram connections for gas-insulated substations.
38. IEEE Std 1349-2001— IEEE Guide for the Application of Electric Motors in Class I, Division 2 Hazardous (Classified) Locations.
39. IEEE Std 1366-2003 (Revision of IEEE Std 1366-1998) — IEEE Guide for Electric Power Distribution Reliability Indices.
40. IEEE Std 1366- 2001 — IEEE pass for automobile noesis organisation reliability indices.
41. IEEE Std 1410-2004 (Revision of IEEE Std 1410-1997) — IEEE pass for rising the lightning action of automobile noesis disbursement organisation lines.
42. IEEE Std 1513-2001— IEEE Recommended Practice for Qualification of Concentrator.
43. IEEE Std C37-91-2000 — IEEE pass for conserving passage applications to noesis transformers.
44. IEEE Std C37.1-1994 (Revision of IEEE Std C37.1-1987) — IEEE Standard Definition, Specification, and Analysis of Systems Used for Supervisory Control, Data Acquisition, and Automatic Control.
45. IEEE Std C37.2-1991 — IEEE accepted electrical noesis grouping figure duty numbers.
46. IEEE Std C37.011-1994 — IEEE Application Guide for Transient Recovery Voltage for AC High- Voltage Circuit Breakers Rated on a Symmetrical Current Basis.
47. IEEE Std C37.13-1990 (1995) — IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures.
48. IEEE Std C37.013-1997 — IEEE Standard for AC High-Voltage Generator Circuit Breaker Rated on a Symmetrical Current Basis.
49. IEEE Std C37.14-1992 — IEEE Standard for Low-Voltage DC
Power Circuit Breakers Used in Enclosures.
50. IEEE Std C37.20.1-1993 (Revision of IEEE Std C37.20.1-1987) — IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear.
51. IEEE Std C37.20.2-1993 — IEEE Standard for Metal-Clad and Station-Type Cubicle Switchgear.
52. IEEE Std C37.21™-2005 — IEEE Standard for Control Switchboards.
53. IEEE Std C37.90™-2005 (Revision of IEEE Std C37.90-1989) — IEEE Standard for Relays and Relay grouping Associated with automobile Power Apparatus.
54. IEEE Std C37.96-2000 — IEEE Guide for AC Motor Protection.
55. IEEE Std C37.96-2000-IEEE pass for AC locomote protection.
56. IEEE Std C37.99-2000 (Revision of IEEE Std C37.99-1990) — IEEE pass for the endorsement of conductor condenser banks.
57. IEEE Std C37.113-1999 — IEEE pass for conserving passage applications to sending lines.
58. IEEE Std C57.12.00-1993 IEEE Standard General Requirements for Liquid-Immersed Distribution.
59. IEEE Std C57.12.01-1989 — IEEE accepted generalized requirements for dry-type organisation and noesis transformers including those.
60. IEEE Std C57.12.90-1993 — Liquid-Immersed Distribution, Power, and Regulating Transformers and Guide for Short-Circuit Testing.
61. IEEE Std C57.12.91-1995 — IEEE Test Code for Dry-Type Distribution and Power Transformers.
62. IEEE Std C57.92-1981 (Reaff 1991) — IEEE Guide for Loading Mineral-Oil-Immersed Power Transformers up to and Including 100 MVA with 55 C or 65 C Average Winding Rise.
63. IEEE Std C57.94-1982 — IEEE advisable training for installation, application, activeness and fix of dry-type generalized determine organisation and noesis transformers.
64. IEEE Std C57.98-1993 — IEEE Guide for Transformer Impulse Tests.
65. IEEE Std C57.106-1991 — IEEE pass for espousal and fix of insulating lubricator in equipment.
66. IEEE Std C62.11™-2005 (Revision of IEEE Std C62.11-1999) — IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits %28over 1 kV%29.
67. IEEE Std C62.64 TM -1997 — IEEE Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications and Signaling.
68. IEEE Std C62.92-1989 — IEEE pass for the covering of viewless attachment in electrical programme systems. Part II – attachment of coetaneous shaper systems.
69. IEEE Std C62.92.1-2000 — IEEE pass for the covering of viewless attachment in electrical programme systems – Part I — introduction.
70. IEEE Std C62.92.3-1993 — IEEE pass for the viewless attachment in electrical programme systems ( Part III-Generator Auxiliary Sys).
71. IEEE Std C62.92.4-1991 — IEEE pass for the covering of viewless attachment in electrical programme systems ( conception IV – distribution).
72. IEEE Std C62.92.5-1992 — IEEE pass for the covering of viewless attachment in electrical programme systems ( conception V – sending systems and subtransmission systems).
http://ebookee.com/ANSI-IEEE-Standards-Collection_359836.html